Nagisk is a simple Perl script to monitor an Asterisk PBX server from Nagios.
Installation and configuration
------------------------------
Follow this link:
http://blog.nicolargo.com/2008/10/superviser-asterisk-dans-nagios-grace-a-nagisk.html
Version tracking
----------------
v1.2.10: 09/2016 by Iain Farrington
-c failover: Shows status of failover devices
v1.2.9: 01/2016 by Pierre-Alexandre CAQUINEAU
- Add actives connections number
v1.2.8: 10/2015 by Luiz Guimaraes
- Add IAX2 peers
v1.2.7: 05/2015 by CAQUINEAU, Pierre-Alexandre
- Manage IPBX with several trunck
v1.2.5: 04/2013 by Xavier Lemaire
Path for the registry command
v1.2.4: 08/2012 by manuel@linux-home.at :
-c pri_spans: Display all dahdi spans
-c dahdi_span: Display the status of the specific dahdi span
-s <span number>: Set the span number (default is 1)
"OK" will return OK
"RED" will return CRITICAL
-c pri_spans: Display all pri spans
-c pri_span: Display the status of the specific span
-s <span number>: Set the span number (default is 1)
"OK" will return OK all else CRITICAL
v1.2.3: 11/2011 by ManuxFR :
-c registry : Display the status of the SIP trunk - "sip show registry"
Compatible with Asterisk 1.8.4.2
v1.2.2: 03/2011 by Frederic:
-c konference: Displays the number of active conferences. Tresholds are against the number
of active conferences. This is for the Konference module, not for the Meetme module. Will show:
"Active conferences: 5"
-c jabber -b <buddy>: Displays the status of a particular jabber buddy. Will show:
"Buddy: freddy (Connected)"
"Connected" will return OK
"Connecting" will return WARNING
"Disconnected" will return CRITICAL
v1.2.1: 03/2011 by Frederic:
+ Implemented warning and critical treshold parameters.
Treshold syntax follows the "Nagios plug-in development guidelines" document (section 2.5).
"-c peers" tresholds are checked against the number of Online and Monitored peers
"-c peer -p <name>" tresholds are checked against the peer latency (ms)
"-c channels" tresholds are checked against the total number of channels
-w <treshold>: Specifies the Warning treshold (default value = 1000)
-x <treshold>: Specifies the Critical treshold (default value = 2000)
v1.2: 03/2011 by Frederic:
+ Now compatible with Asterisk 1.6.2.X
-c peer -p <name>: Display the "status" of "sip show peer <peer>":
"myowntelco: OK (65 ms)"
+ "-c channels" is now using "core show channels" with new output parsing:
"26 active channels 12 active calls 317 calls processed"
+ Replaced "show version" by "core show version" which will parse and show:
"Asterisk 1.6.2.13"
v1.1: Add the following options:
-c zaptel: Display the status of the zaptel card
-c span: Display the status of a specific span (set with -s option)
-s <span number>: Set the span number (default is 1)
v1.0: first public release
License
-------
Distributed under the GPLv3 license.
