- Pоутеры с новым железом
- ramips
- Kyan KY928A. rt5350 flash 4Mb, DDR1-32Mb, USB2.0 и следующие сообщения.
- Outengda-M810 WPL6036. MT7620 flash 4-8Mb, DDR2-64Mb, USB есть, но только питание.
- WD7620N-R1-V1. MT7620 flash 4Mb, DDR1-32Mb, USB2.0
- KYAN-300M. MT7628 flash 8Mb, DDR2-64Mb, USB2.0
- Sunxi
-
=====================================
| |.-----.-----.-----.| | | |.----.| |_ | - || _ | -| || | | || || | |_____|| |||||___||| |____| || W I R E L E S S F R E E D O M
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
-
Run "./scripts/feeds update -a" to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default
-
Run "./scripts/feeds install -a" to install symlinks for all obtained packages into package/feeds/
-
Run "make menuconfig" to select your preferred configuration for the toolchain, target system & firmware packages.
-
Run "make" to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the Linux kernel & all chosen applications for your target system.
Sunshine! Your OpenWrt Community http://www.openwrt.org