This repository was archived by the owner on Jul 29, 2024. It is now read-only.
Repository navigation
The Frame
You will mainly need the following parts printed. The drone can be built with the top and bottom plates and a few M3 screws. For safety reasons, it is strongly encouraged also to include the Guard.
- 1x Bottom Plate
- 1x Top Plate
- 4x Guard Extension (optional)
- 2x Guard (optional)
Unless you want to modify the original design, you can safely download the .stl files and 3d print them. They are in this folder.
The CAD files are available on as web-based CAD software "Onshape": Link