You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository was archived by the owner on May 29, 2026. It is now read-only.
Repository navigation
This repository was archived by the owner on May 29, 2026. It is now read-only.
Is this a new feature, an improvement, or a change to existing functionality?
New Feature
How would you describe the priority of this feature request
Critical (currently preventing usage)
Please provide a clear description of problem you would like to solve.
We are currently testing the capabilities of Modulus Sym. We have a specific task and we want to determine the E-field around a metallic conductor in a dielectric or air in 3D. Boundary conditions such as PML or PEC and also Maxwell's equation as PDE have already been implemented.
At the boundary condition for the input, we want to specify one or more modes that have propagated in an upstream RF circuit within the stripline. We have already tried to define the E-field at the input and we have also done tests with parameterised geometries - this looks very promising, but does not exactly address the problem we want to solve.
Another cool feature would be the possibility to not only vary geometry parameters within the training, but also to pass the frequency as a parameter to map a whole range (e.g. 10 GHz - 50GHz).
An example geometry is shown below. Sampling points for the dielectric or air area are shown in blue and a 90 degree transition from stripline to via and back to a stripline is shown in red.
Closing as part of the archival of this repository. The key components have been upstreamed to NVIDIA/physicsnemo. Please refer to the v2.0 Migration Guide and feel free to re-open your issue there if it is still relevant.
Is this a new feature, an improvement, or a change to existing functionality?
New Feature
How would you describe the priority of this feature request
Critical (currently preventing usage)
Please provide a clear description of problem you would like to solve.
We are currently testing the capabilities of Modulus Sym. We have a specific task and we want to determine the E-field around a metallic conductor in a dielectric or air in 3D. Boundary conditions such as PML or PEC and also Maxwell's equation as PDE have already been implemented.
At the boundary condition for the input, we want to specify one or more modes that have propagated in an upstream RF circuit within the stripline. We have already tried to define the E-field at the input and we have also done tests with parameterised geometries - this looks very promising, but does not exactly address the problem we want to solve.
Another cool feature would be the possibility to not only vary geometry parameters within the training, but also to pass the frequency as a parameter to map a whole range (e.g. 10 GHz - 50GHz).
An example geometry is shown below. Sampling points for the dielectric or air area are shown in blue and a 90 degree transition from stripline to via and back to a stripline is shown in red.
Describe any alternatives you have considered
No response
Additional context
No response