Skip to content

Latest commit

 

History

History
15 lines (12 loc) · 1.04 KB

README.md

File metadata and controls

15 lines (12 loc) · 1.04 KB

echo-upper

Communication test between ESP32 boards (client) and a central PC (server).

Running the example

  1. Build and run the server cd server && ant build run [-Dport=<port_number>] (default port is 9991)
  2. Specify the Wi-Fi SSID and password by modifying the WIFI_SSID and WIFI_PASSWORD #define constants in echo-upper.c
  3. Configure the server destination and port in the same echo-upper.c file (SERVER_ADDRESS and SERVER_PORT #define constants)
  4. Build and run the application with idf.py -p PORT flash monitor, where PORT indicates the serial port to which the ESP32 board is connected to (e.g., "COM3" on Windows or "/dev/ttyUSB0" on Linux)
  5. You can stop the board application with the Ctrl + ] key combo

Result

  1. The server starts and waits for a connection to be established on its port
  2. The board will connect to the Wi-Fi network and send a test string to the server
  3. The server will reply with the same string after swapping its case