Where to get "genavb_sdk.h"

[Sinai]

Hi ,

First of all thank you for the great work. I am trying to build the bridge application for target freertos_rt1189_cm33 .
I am working with NXP MIMXRT1180-EVK board.
I have setup env variable MCUX_SDK to the SDK_2_16_000_MIMXRT1180 from NXP .
i have setup env variable RTOS_APPS to the genavb-apps-freertos-5_6_0 .
In rtos/config.h file their is include "genavb_sdk.h" .
I don't know where to get this file? It is not included in MCUX_SDK and RTOS_APPS .
Do you have any idea?
Can it be replaced with "genavb.h"?

Thank you

[Sinai]

Hi
I try to build the bridge application for config_freertos_RT1189_m33 runing the following:

$ cmake . -B build/ -DTARGET=config_freertos_RT1189_M33 -DCONFIG=bridge
$ make -C build/ install

build went succesfully.

However i dont have binaries;
*.bin
in build/ direcotry??
I only have library stacks *.a files.

Why their is no Binaries?

Thank you

[laurent5791]

Hi Sinai,

Thanks for evaluating NXP's GenAVB/TSN stack.

SDK_2.16 and genavb v5.6.0 are not compatible. For any development on iMXRT1189 with SDK 2.16 you should use the latest GenAVB/TSN software version 6.3.3 available for download on https://mcuxpresso.nxp.com/

https://mcuxpresso.nxp.com/en/dashboard?download=408c7573745b131680bcc160a866f47b

Regards
Laurent

[Sinai]

Hi @laurent5791

Thank you for your reply and help.

The current GenAVB/TSN is 6.2 , which is also the current newst Branch on this repository.
If version 6.3.3 is available than i assume their will be a new branch in this repository called 6.3.3, which is not the case yet!

How can i download GenAVB/TSN software version 6.3.3 available for download on https://mcuxpresso.nxp.com/ ?
If i google it it will breng me back to this repository!

Cheers,
Thank you

[laurent5791]

Hi @Sinai,

Releases posted in this github repo are intended to be used for MPU devices running Linux. Please see "Supported hardware targets and configurations" in the README.md file.

For MCU/Freertos (iMXRT1180) the latest release is GenAVB/TSN 6.3.3 (not uploaded in this repo). Can you double check the following link ? : https://mcuxpresso.nxp.com/en/dashboard?download=408c7573745b131680bcc160a866f47b
it should drive you directly to the 6.3.3 download page on the mcuxpresso website.

Regards,
Laurent

[Sinai]

Hi Laurent,

Thank you for the help,
I got it working now.
I want to run AVB Endpoint on iMXRT1180 Board,
In the given examples , this is not the case.

I think it should be possible to run AVB Endpoint on iMXRT1180 ,
However more work/code is needed in the SDK of the iMXRT1180!
Is this right?

Thank you
Best Regards
Sinai

[basmevissen]

Hi @Sinai,

Releases posted in this github repo are intended to be used for MPU devices running Linux. Please see "Supported hardware targets and configurations" in the README.md file.

For MCU/Freertos (iMXRT1180) the latest release is GenAVB/TSN 6.3.3 (not uploaded in this repo). Can you double check the following link ? : https://mcuxpresso.nxp.com/en/dashboard?download=408c7573745b131680bcc160a866f47b it should drive you directly to the 6.3.3 download page on the mcuxpresso website.

Regards, Laurent

Hi Laurent,

It seems like the link above now points to the genavb_tsn-mcuxpresso-SDK_25_06_00-7_2_1 release. Is there a way to find the latest release that is intended to run on RT1180EVK?

I cannot find GenAVB/TSN as middleware or example at https://mcuxpresso.nxp.com/, even when I don't select hardware.
However, the 7.2.1 version is also shown at https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/wired-communications-middleware-for-nxp-microcontrollers:WIRED-COMM-MIDDLEWARE#avb-tsn (a link I only discovered using a search engine).

What is the recommended way to (manually and structured) check compatible versions of this software?

Many thanks in advance,
Bas.