Freenove CYD FNK0104

[SP3CTRYS]

Good day all! I am a novice with Arduino, but I do understand how to read the code and determine what I need to change.
I recently bought the Freenove ESP32-S3 IPS Display, and wanted to try it with Bruce.

The Bruce flasher was giving an error that he ESP32-S3 version is not supported, when I use the CYD flash options. So I think I have to go down the manual programming and flashing route.
Interestingly, I can flash the ESP32-S3 and it gives me console output. From there I can use bruce, but the display does not work obviously as the "drivers" are missing from the flash.

I figured before I invest too much time in research and manual coding, I would ask if anyone else has the same display and if they have some code they can share :)
Also, would I be correct in cross referencing the Bruce source code and the Freenove project files to determine which pins I am using?

Link to the board: https://store.freenove.com/products/fnk0104

[DedSmurfs]

Was any solution to this figured out?

I have the same board and the same problem